Connecting Coaxial (Rf); Using Your Antenna Or Cable Tv; Using The Antenna Through Your Vcr - Vizio L32 User Manual

2.5 - Connecting Coaxial (RF)

There are several options for connecting your antenna or cable to your new L32 LCD TV - directly
to the TV or through your VCR. Based on your home theater configuration, you can decide which
option is the right one for you.

2.5.1 - Using Your Antenna or Cable TV

Installation:
1. Turn off the power to the LCD TV.
2. Connect the coaxial (RF) connector from your antenna, cable or cable box to the ANT
connector on the rear of your LCD TV.
3. Turn on the power to the LCD TV
4. Select TV using the INPUT button on the front of the LCD TV.
Note: See page 27 for selecting the TV source within the OSD menus (antenna, cable,
HRC and IRC). Make sure the antenna or cable TV is correctly grounded.

2.5.2 - Using the Antenna through Your VCR

Installation:
1. Turn off the power to the LCD TV and VCR.
2. Connect the "Output to TV" (RF Out or Antenna Out) connector on the rear of your VCR
to the ANT connector on the rear of your LCD TV.
3. Turn on the power to the LCD TV and VCR.
4. Select TV using the INPUT button on the front of the LCD TV.
5. Select Channel 3 or 4 to match the channel selected on the rear of your VCR.
Note:
a) If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to
the RF connector on the rear of your VCR.
b) Make sure the antenna or cable TV is correctly grounded.
Version - 4/14/2005 20
www.vizioce.com
VIZIO L32 User Guide