1-2 Product Specifications
CPU
AM3+ Socket:
-
-
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport
5200 MT/s
Bus
North Bridge: AMD 880G
Chipset
South Bridge: AMD SB710
Memory
2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory
Dual channel memory architecture
Support for DDR3 1866(O.C.)/1600/1066 MHz memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
North Bridge:
Graphics
-
-
-
Audio
Realtek/VIA HD audio codec
High Definition Audio
2/4/5.1/7.1-channel
LAN
1 x Atheros GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16
1
(All PCI Express slots conform to the PCI Express 2.0 standard.)
1 x PCI slot
Storage Interface
South Bridge:
-
-
USB
South Bridge:
-
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 4-pin ATX 12V power connector
6 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
AMD AM3+ processor
AMD AM3 Phenom
II processor/ AMD Athlon
™
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
1 x D-Sub port
1 x DVI-D port, supporting a maximum resolution of 2560x1600
* The DVI-D port does not support D-Sub connection by adapter.
* The resolution of 2560x1600 is supported only when Dual Link DVI mode is enabled.
1 x HDMI port, supporting a maximum resolution of 1920x1200
* Simultaneous output for DVI-D and HDMI is not supported.
* To enable 7.1-channel audio, you have to use an HD front panel audio module and
enable the multi-channel audio feature through the audio driver.
x PCI Express x1 slot
6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
- 8 -
II processor
™