Attach Connectors - SOYO SY-5EMA+ Quick Start Manual

Attach Connectors

Step 4.
This section tells how to connect internal peripherals and power supply to the Motherboard.
Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel
Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.),
Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on how to connect internal and external peripherals to your new SY-5EMA+
V1.x Super 7 ™ Motherboard, please refer to SY-5EMA+ V1.x Motherboard User's Guide
and Technical Reference online manual on CD-ROM.
Connectors and Plug-ins
IrDA (Infrared Device Header): IR1
Pin1 Pin2 Pin3
VCC None IRRX
CPU Cooling Fan: CPUFAN
Pin1 Pin2
GND 12V
Power LED Key Lock
_
+
+
+
Reset PWRBT Turbo LED HDD LED
HDD LED
Pin1 Pin2
LED Anode LED Cathode LED Anode LED Cathode Power On/Off GND
Connect your power switch to this header (momentary switch type).
To turn off the system, please press this switch and hold down for longer than 4 seconds.
Attach the ATX Power cable to this connector.
Please make sure the ATX power supply can take at least 720mA load on the 5V standby lead (5VSB), if you
want to use the advanced power management functions like Power-On by modem or WOL.
SY-5EMA+ V1.x Quick Start Guide
Pin4 Pin5
GND IRTX
Chassis Cooling Fan: CHAFAN
Pin3 Pin1 Pin2
NC GND 12V
Speaker
_
Pin1
5V
_
_
+
Pin1
5V
TB LED
Pin1 Pin2
ATX Power On/Off: PWRBT
ATX Power Supply: ATX PW
13
Wake-On-LAN Header: JP44
Pin1 Pin2
5VSB GND
Pin3
Connect your USB devices
to this header.
NC
Power LED
Pin2 Pin3 Pin1
NC GND Control Pin
Speaker
Pin2 Pin3
NC NC
PWRBT
Pin1 Pin2
Power Good
Pin3
MP-Wakeup
USB
Keylock
Pin2
GND
Pin4
Speaker out
RESET
Pin1 Pin2
GND