Chapter 2 System Safety; Overview; Warnings And Precautions; Preparing For Setup - Supero SC846TQ-900B User Manual

Sc846 chassis series

Hide thumbs Also See for SC846TQ-900B:

Table of Contents

2-1

This chapter provides a quick setup checklist to get your chassis up and running.

Following the steps in order given should enable you to have your chassis setup and

operational within a minimal amount of time. This quick set up assumes that you are

an experienced technician, famailiar with common concepts and terminology.

2-2

You should inspect the box the chassis was shipped in and note if it was damaged

in any way. If the chassis itself shows damage, ﬁle a damage claim with carrier

who delivered your system.

Decide on a suitable location for the rack unit that will hold that chassis. It should

be situated in a clean, dust-free area that is well venilated. Avoid areas where heat,

electrical noise and eletromagnetic ﬁelds are generated.

You will also need it placed near at least one grounded power outlet. When con-

ﬁgured, the SC846 chassis includes one power supply. "R" models (i.e. SC846S-

R650V Chassis) include a redundant power supply and require two grounded

outlets.

2-3

The SC846 Chassis includes a set of rail assemblies, including mounting brackets

and mounting screws you will need to install the systems into the rack. Please read

this manual in its entirety before you begin the installation procedure.

2-4

Basic electrical safety precautions should be followed to protect yourself from harm

and the SC846 from damage:

Chapter 2

System Safety

2-1

Chapter 2: System Safety

Table of Contents