Installing The Usb Driver For Windows Millennium - Linksys BEFCMU10 ver.2 User Manual

Installing the USB Driver for Windows Millennium

1. Start up your PC in Windows Millennium. Windows will detect new hard-
ware connected to your PC.
2. Insert the Setup CD into your CD-ROM drive. When Windows asks you
for the location of the best driver, select Automatic search for a better
driver (Recommended) and click the Next button.
3. Windows will begin installing the driver for the modem. At this point, the
installation may require files from your Windows Millennium CD-ROM. If
prompted, insert your Windows Millennium CD-ROM into your CD-ROM
drive and enter d:\win9x in the box that appears (where "d" is the letter of
your CD-ROM drive). If you were not supplied with a Windows CD-ROM,
your Windows files may have been placed on your hard drive by your com-
puter manufacturer. While the location of these files may vary,
12
Instant Broadband
Figure 3-6
Figure 3-7
EtherFast
Series
TM
many manufacturers use c:\windows\options\install as the path. Try
entering this path into the box. If no files are found, check your comput-
er's documentation or contact your computer manufacturer for more infor-
mation.
4. When Windows finishes installing the driver, click Finish.
5. When asked if you want to restart your PC, remove all diskettes and CD-
ROMs from the PC and click Yes. If Windows does not ask you to restart
your PC, click the Start button, choose Shut Down, choose Restart, then
click Yes.
The Windows Millennium driver installation is complete. Return to the
section on Connecting Using the USB Port to finish the set up.
® Cable Modem with USB and Ethernet Connection
Figure 3-8
Figure 3-9
13