5. Windows will notify you that it has located the appropriate driver and is
ready to install it. Click the Next button.
6. When Windows has completed installing the driver, click Finish.
The Windows 2000 driver installation is complete. Return to the section
on Connecting Using the USB Port to finish the set up.
16
Instant Broadband
Figure 3-14
Figure 3-15
Series
EtherFast
TM
Installing the USB Driver for Windows XP
1. Start up your PC. Windows will notify you that it has detected new hard-
ware. Insert the Setup CD into the CD-ROM drive.
2. When the Found New Hardware Wizard screen appears to confirm that the
USB Modem has been identified by your PC, make sure that the Setup CD
is in the CD-ROM drive and click Next.
®
Cable Modem with USB and Ethernet Connection
Figure 3-16
Figure 3-17
17