Gigabyte GA-Z77X-UD4H User Manual page 92

Create a RAID Array:
Step 1: On the main screen, press <Enter> on the RAID tab. Then the RAID Config menu appears (Figure 6).
Press <Enter> on the Create VD item.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter] [ Devices]
ENTER/SPACE: Select, ESC: Back/Exit
Step 2: The next screen displays the two hard drives you installed. Press <Enter> or <Space> on the two hard
drives respectively to add them into the RAID array. Selected hard drives are marked with an asterisk (Figure
7). Then press <Enter> on NEXT.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter] [ Devices]
Select free disks to create
Port Disk Name
* S0 SATA: WDC WD800JD-22LSA0
* S1 SATA: WDC WD800JD-22LSA0
NEXT
ENTER/SPACE: Select, ESC: Back/Exit
Appendix
[ RAID ]
RAID Config
Create VD
Delete VD
Wipe out disk
Spare Management
Figure 6
[ RAID ]
RAID Config
Size Max Speed
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE
Figure 7
- 92 -
Status