Gigabyte GA-Z77X-UD4H User Manual page 33

17/18/19) PW_SW/RST_SW/CMOS_SW (Quick Buttons)
This motherboard has 3 quick buttons: power button, reset button and clear CMOS button. The power button
and reset button allow users to quickly turn on/off or reset the computer in an open-case environment when
they want to change hardware components or conduct hardware testing. Use this button to clear the CMOS
values (e.g. date information and BIOS configuration) and reset the CMOS values to factory defaults when
needed.
CMOS_SW
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
PW_SW
PW_SW: Power button
RST_SW
RST_SW: Reset button
CMOS_SW: Clear CMOS Button
- 33 - Hardware Installation