Belkin N1 MIMO User Manual page 42

Troubleshooting
The Adapter does not perform or connection is unstable
when computer has a second built-in wireless network
card (such as a mini PCI or Intel
This condition occurs if your computer has a built-
in wireless card while your Belkin N1 Wireless USB
Adapter is also active . This happens because Windows
must now handle two active wireless connections .
You must disable the built-in wireless card from your computer
under "Network Adapters" in the Device Manager .
The Adapter does not perform or connection is slow
when computer has a built-in wired Ethernet card .
This condition occurs if your computer has an active Ethernet
card while your Adapter is also active . This happens because
Windows must now handle two active network connections .
You must disable the Ethernet card from your computer
under "Network Adapters" in the Device Manager .
What's the difference between 802 . 1 1b,
802 . 1 1g, 802 . 1 1a, and draft 802 . 1 1n?
Currently there are four levels of wireless networking standards,
which transmit data at very different maximum speeds . Each
is based on the designation for certifying network standards .
The most common wireless networking standard, 802 . 1 1b,
transmits information at 11Mbps; 802 . 1 1a and 802 . 1 1g work
at 54Mbps; and draft 802 . 1 1n works at up to 300Mbps . See
the chart on the next page for more detailed information .
Centrino ) .
® ™
English 40