C - Insert - Belkin N1 MIMO User Manual

Installing and Setting up the Adapter
C . Insert
Insert the Adapter into your Computer
C.1 After the software installation is finished, the
message "Please plug in your USB Adapter
now" will appear . Insert your Adapter .
C.2 The Found New Hardware Wizard might
appear . (This may take 3–15 seconds .)
If it does, continue with the following
instruction . Select "Yes, this time only"
and click "Next" to install the hardware .
If the Found New Hardware Wizard
does not appear, skip to step C .7 .
C.3
Select "Install the software automatically"
and click "Next" to install the hardware .
English 16