Configuration Menu - Grandstream Networks HandyTone-286 User Manual

HandyTone User Manual
The password is case sensitive and the factory default password is lower case 'admin'.

5.2.2 Configuration Menu

After the correct password is entered in the login screen, the embedded Web server
inside the HandyTone ATA will respond with the Configuration Menu screen which is
explained in details below.
The definitions for all the configuration parameters in the Configuration Menu are:
Password
IP Address
SIP Server
Outbound Proxy
This contains the password to access the Web Configuration Menu.
This field is case sensitive.
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP
mode are not used (even though they are still saved in the Flash
memory) and the HandyTone ATA will acquire its IP address from
the first DHCP server it discovers on the LAN it attaches to.
- If Static IP mode is selected, then the IP address, Subnet Mask,
Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary) fields will need to be configured. These fields are reset
to zero by default.
This field contains the URI string or the IP address (and port, if
different from 5060) of the SIP proxy server. e.g., the following are
some valid examples: sip.my-voip-provider.com, or sip:my-
company-sip-server.com, or 192.168.1.200:5066
This field contains the URI string or the IP address (and port, if
different from 5060) of the outbound proxy. If there is no outbound
proxy, this field SHOULD be left blank. If not blank, all outgoing
requests will be sent to this outbound proxy.
Grandstream Networks, Inc
- 14 -
.