Advanced Settings Page Definitions; Grandstream Networks, Inc - Grandstream Networks GXV3140 User Manual

Status
Status/Network Status
MAC Address
Address Type
IP Address
Subnet Mask
Gateway
DNS Server
NAT Type
Status/System Info
Product Model
Hardware Revision
PN Code (Part Number)
Software Version
System Up Time

ADVANCED SETTINGS PAGE DEFINITIONS

Advanced Settings/General Settings
Local RTP Port

Grandstream Networks, Inc.

Shows the status of the account.
The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
This field shows the type of address configured: DHCP, Static IP or PPPoE.
This field shows the IP address of the GXV-3140.
This field shows the subnet mask of the GXV-3140.
This field shows the Gateway of the GXV-3140.
This field shows the DNS Server of the GXV-3140.
This field shows the type of NAT configured.
Defines the product model: GXV3140.
Hardware version number: Main Board, Interface Board.
This field contains the product part number.
• Program: This is the main firmware release number, which is always used
for identifying the software (or firmware) system of the phone.
• Boot: Booting code version number.
• DSP: DSP code version number.
• Base: Base code version number.
• Core: Core code version number.
• GUI-A, GUI-B: GUI interface version number.
This field shows system up time since the last reboot.
This parameter defines the local RTP-RTCP port pair used to listen and
transmit. It is the base RTP port for channel 0. When configured, for audio,
channel 0 will use this port _value for RTP and the port_value+1 for its
RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its
RTCP. For video, channel 0 will use port_value+2 for RTP and port_value+3
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.7.3
Page 35 of 147
Updated : 11/2010