Advanced Settings Page Definitions - Grandstream Networks GXV3140 User Manual

System Up Time
Status/Network Status
MAC Address
Address Type
IP Address
Subnet Mask
Gateway
DNS Server
NAT Type
Status/Account Status
Account
Number
SIP Server
Status

ADVANCED SETTINGS PAGE DEFINITIONS

Advanced Settings/Generic Settings
Lock Keypad for
Update
Local RTP Port
GXV3140 USER MANUAL
SOFTWARE VERSION 1.0.0.44
• Boot: Booting code version number
• DSP: DSP code version number
• Base: Base code version number
• Core: Core code version number
• GUI-A, GUI-B: GUI interface version number
This field shows system up time since the last reboot.
The device ID, in HEX format. This is a very important ID for ISP troubleshooting.
This field shows the type of address configured: DHCP, Static IP or PPPoE.
This field shows the IP address of the GXV-3140.
This field shows the subnet mask of the GXV-3140.
This field shows the Gateway of the GXV-3140.
This field shows the DNS Server of the GXV-3140.
This field shows the type of NAT configured.
Shows the status of the 3 accounts
Shows the extension number of the SIP account.
Shows the URL/IP address and port of the SIP server
Shows the status of the account.
The default value is NO. If set to YES, the keypad will be disabled from making
any updates.
This parameter defines the local RTP-RTCP port pair used to listen and transmit.
It is the base RTP port for channel 0. When configured, for audio, channel 0 will
use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will
use port_value+4 for RTP and port_value+5 for its RTCP. For video, channel 0
will use port_value+2 for RTP and port_value+3 for its RTCP; channel 1 will use
port_value+6 for RTP and port_value+7 for RTCP. The default value is 5004
www.grandstream.com
support@grandstream.com