Part Names and Functions
Remote Control
Name
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection"
B
Each time you press the button, the image displayed
[Computer] button
changes between the Computer1, Computer2, and the
DisplayPort (EB-1965/EB-1955/EB-1945W/EB-1935
only) ports.
C
Each time the button is pressed, the image displayed
[Video] button
changes between the Video input port and HDMI input
port.
D
Adjusts the projected image so that it fits the screen frame.
[Screen Fit] button
s "Automatically adjust to fit into the screen frame -
Screen Fit"
This button is disabled when the projector is suspended
from a ceiling or if the projector model does not support
this function.
• Enter the Password.
E
Numeric buttons
s "Setting Password Protect"
• Use this button to enter numbers in Network settings
from the Configuration menu.
F
If pressed while projecting analog RGB signals from the
[Auto] button
Computer port, you can automatically optimize Tracking,
Sync., and Position.
G
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image "
p.49
H
Hold down this button and press the numeric buttons to
[Num] button
enter passwords and numbers.
s "Setting Password Protect"
I
Displays and closes the Configuration menu.
[Menu] button
s "Using the Configuration Menu"
Function
p.33
p.42
p.67
p.67
p.88
17