Turtle Beach Ear Force X41 User Manual page 10

Xbox live chat plus wireless digital rf game audio with dolby headphone 7.1 surround sound
Hide thumbs Also See for Ear Force X41:
Table of Contents

Advertisement

Pairing the X41 Headset and Transmitter
The headset and transmitter in this package are "paired", which means they're
synchronized to ensure they work together. When the headset and transmitter are
communicating, the top LED on the front panel of the transmitter will be on solid. If
this LED is instead slowly pulsing, it means the transmitter can't communicate with
the headset. This could happen if the headset is turned off or out of range. If the LED
is slowly pulsing when the headset is on and within range, then they might need to be
"paired" as described below:
Step 1:
Make sure the headset is
off by pressing the "Power"
button until the LED turns on,
and then release it. Make sure
the headset LED is off.
Step 2:
Then press and hold the
headset power button until
the LED turns on solid and
release the button when the
LED turns off. The headset
LED will start to flash rapidly.
After a few seconds, the topmost transmitter LED should be on solid and the headset
LED should be flashing about once per second, indicating that the units are paired.
Interference from Two Headsets
Only one headset can be paired with the transmitter. If you pair two headsets with the
same transmitter, they'll interfere with each other as they compete for the transmitter
RF signal. This will cause one headset to shut off. So don't try to pair two headsets
with the same transmitter!
Page 10
EFFECTS
POWER
Step 3:
Press and hold the transmitter
"Bypass" button for 5 seconds
until the topmost LED on the
transmitter turns off, then release
the button. The transmitter LED
will then flash rapidly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents