TANDBERG 3G Gateway User Manual page 42

TANDBERG 3G Gateway User Manual
Configuration
SNMP Mode
The SNMP operation modus can be set to:

On, turnn SNMP on;

Off, turn SNMP off;

ReadOnly, Do not send SNMP information to the host.;

Trapsonly, Only send SNMP information identified as TRAPS to the host.
SNMP Community Name
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have
this 'password' in order to receive a response from the SNMP agent in the gateway.
SNMP Trap Host (1, 2 and 3)
Identifies the IP-address of the SNMP manager. Up to three different SNMP Trap Hosts can be
defined. Your LAN administrator should provide the correct values for these fields.
System Contact
Used to identify the system contact via SNMP tools such as HPOpenView or TANDBERG
Management Suite.
Location
Used to identify system location via SNMP tools such as HPOpenView or TANDBERG
Management Suite.
Save
Press 'Save' to activate the new settings.
TANDBERG Gateway
42