Energy Saving; Software Upgrade; Using A Chargepak - PURE ONE CLASSIC Owner's Manual

Energy saving

ONE Classic is part of the PURE EcoPlus product family, designed and manufactured to minimise
power consumption when the unit is switched on and to use less than 1 Watt in standby. One way
this low power consumption is enabled is by not collecting and storing Intellitext messages when
the unit is in standby. Two options are available:
On (default) ONE Classic updates the Intellitext data when you tune to a station that broadcasts
Off
Note: If you fi t the optional ChargePAK C6L or 6 x 'C' batteries (see below) the unit will switch
off when you press the Standby button and not enter standby, as long as the unit is not
connected to mains power.

Software upgrade

Software updates for your ONE Classic may be made available in the future. If you register your
product and include a valid e-mail address you will receive notifi cation of software updates
(register at www.pure.com/register or fi ll in the supplied warranty card). Available software
updates are also listed at www.pure.com/support.*
To upgrade your radio
1. Press and hold the Menu button for three seconds to access the maintenance menu.
2. Select 'Upgrade' and follow the instructions provided with the upgrade software.
Reset your radio
Resetting your radio removes all presets, clears the station list and resets all options to defaults.
1. Press and hold the Menu button for three seconds to access the maintenance menu.
2. Rotate the dial to choose 'Factory Reset' and push the dial to confi rm the reset.

Using a ChargePAK™

PURE ChargePAK C6L is a rechargeable battery pack which plugs into the socket in the radio's
battery compartment. Whenever your radio is connected to a mains supply the ChargePAK will
charge up and the battery icon on screen will animate. When the ChargePAK is fully charged the
battery icon will disappear.
To purchase a PURE ChargePAK C6L, contact your nearest PURE dealer, visit the shop on our
website at www.pure.com or call the PURE order line on
Note ONE Classic can only be powered with a ChargePAK C6L or 6 x 'C' cell batteries. Do not
use any other ChargePAK model. Carefully follow the separate fi tting instructions that are
supplied with the ChargePAK C6L.
Using the alarm when using ChargePAK C6L or batteries
When a ChargePAK rechargeable battery or 'C' cell batteries are fi tted and the unit is not
connected to mains power the radio switches off completely when the Standby button is pressed.
In this case, the message 'Disabling alarm' will be briefl y displayed after the Standby button is
pressed and the alarm will not sound.
10
Options and settings
*Requires a PC (not Mac) with internet access running Windows XP and a suitable USB cable (not included).
Intellitext. Intellitext data is not collected in standby.
ONE Classic collects Intellitext data in standby from the last station viewed
Intellitext, which increases standby power consumption.
+44 (0)845 148 9001
EcoPlus
.