Other External Components; Using External Audio/Video Players-Av-In; Using A Rear View Camera - Kenwood DDX4025DAB Instruction Manual

OTHER EXTERNAL COMPONENTS

OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
You can connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals. (Page 52 )
Preparation:
If you want to use "AV-IN2", select [AV-IN2] for <AV
Input> setting. (Page 43)
• No preparation is required for "AV-IN1".
Indications and buttons on the source
control screen
AV-IN name
Operation buttons
[MODE] Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name "AV-IN 1"/ "AV-IN 2"
displayed on <Top Menu>.
[MENU] Displays the <Top Menu> screen.
26
Starting playback
1
Connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals.
2
Select "AV-IN1" or "AV-IN2"as the source.
(Page 9)
3
Turn on the connected component and
start playing the source.

Using a rear view camera

• To use a rear view camera, a REVERSE lead
connection is required. (Page 51 )
Activating the rear view camera
1
Display the <Input> setting screen.
On the <Top Menu> screen:
2
To deactivate: Select [Off] for <R-CAM Interrupt>.
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
DDX4025DAB/DDX4025BT/
DDX4055BT*
1
DDX3025/DDX3055* DDX355*
2
(Hold)
• When displaying the picture from the rear view
camera manually, you can change the setting
of the picture using [Zoom]/[Aspect]/[Adjust].
(Page 37)
To exit the rear view screen: Press and hold the
same button again.
This operation works only when <TEL Key Long Press> is
*
1
set to [R-CAM]. (Page 44)
This operation works only when <AUD Key Long Press> is
*
2
set to [R-CAM]. (Page 44)
(Hold)
2
(Hold)