To Remove The Cross-Bar Assembly (If Equipped) - Ford Freestar 2007 Owner's Manual

Driver Controls

To remove the cross-bar assembly (if equipped):

1. Remove rear support covers from
the rear rails. Place a small object
into the pin holes and slide the
cover out towards the rear of the
vehicle.
2. Loosen the thumbwheel at both
ends of the cross-bar and slide the
cross-bar towards the rear of the
vehicle.
3. De-press the metal retention clip
located in the inner rail channel on
both sides, and slide the crossbar
out simultaneously.
93
2007 Freestar (win)
Owners Guide (post-2002-fmt)
USA (fus)