23
Troubleshooting
Remarks
•
Check that the batteries are fresh and installed correctly.
•
Check that the control mode on the remote is set to TV.
•
Be no more than
20
feet from the TV when using the remote control.
•
Program the remote control to operate the TV or other device.
•
Reset the remote control.
Replace the batteries.
•
Turn off the TV's HDMI control for the specific device. Open .
the Inputs> HDMI Control menu, select the device, select
Off.
I .
Disable CEC on the device itself. See the device's instruc-
tions.
.•
If the problem persists, do the following:
1.
Disconnect the device from the TV.
2.
Open the Inputs> Name menu, select the device and delete.
3.
Reconnect the device to the TV and Auto Input Sensing will
recognize the device with
CEC
disabled.
When I try to use the remote control, the
POWER
blinks five times.
.
_--~~_
..
~.~--~~~-~.
TV does not respond to the remote control or
Unplug the AC power cord for
10
seconds.
to control-panel buttons and TV will not power
I
Press and hold the POWER button on the control panel for
10
on or off.
'
seconds to perform system reset.
._ _ .
--~~~~-~----~~---"~~'--"--""'--~<,"-
Make sure the selected device is turned on.
Begin play of the device.
You have forgotten your Lock menu pass
code.
a device is selected from the Activity
menu, the screen is blue or black (no signal
Rating restrictions are not working.
General TV Op.eration
Symptom
_ . ~
•.
_-
~._.~.~-".-
1.
The TV remote control does not work.
When prompted for the pass code, press the number
9
and
Ci)
, (LAST) keys on the TV remote control at the same time. This
I
process temporarily unlocks the TV.
...
+=-~
- _••.
_-~
.._ - -
Open the Lock> Parental Lock menu and:
•
Verify that the ratings locks are active.
•
Check the Lock Time/Unlock Time to check if rating restric-
tions are disabled.
_.~.~~.~.~ .~.~ .. ~ ...._.. ~~ .... .,~ •.. ~ Rating re~~.ricti5>nS. aPE~y .?.!"'Iy_to content on the ANT inp~!.
; On-screen displays appear each time you
Normal TV operation.
change a function.
8.
I have turned on
CEC
for my HDMI devices but
control is erratic and I wish to disable it.
3.
2.