Using The Smart Wizard To Change The Setup - NETGEAR WNCE4004 User Manual

Wireless HD Video and Gaming Adapter WNCE4004

Using the Smart Wizard to Change the Setup

The Smart Wizard helps you set up your Internet adapter. For information about advanced
configuration, see
The Wireless HD Video and Gaming Adapter (WNCE4004) Installation Guide, included in the
package, explains how to install your Internet adapter. During installation, when you launch
your Internet browser, the Smart Wizard automatically displays.
After installation, to use the Smart Wizard again:
1. Connect the Internet adapter to a computer, and go to http://www.mywifiext.net as
described in Preparing to Change Your Internet Adapter Settings
2. From the menu on the left, select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
Installation Guide.
3. You can select a network from the list, or select the Manually input my wireless SSID
radio button. Click Continue. When you have selected the network that you want to join, the
next wizard screen displays. Follow the onscreen prompts to connect to a wireless network:
4. When the Review Settings screen displays, click Finish. If you are finished making changes,
disconnect your Internet adapter from your computer, and reconnect it to the device on
which you want to use it.
Chapter 2, Advanced Settings.
on page 6.
Chapter 1. Getting Started | 7