NETGEAR WNCE4004 Installation Manual

Installation Guide
Wireless HD Video and Gaming Adapter
WNCE4004
Ethernet cable
Power
adapter
WPS
WPS
Link LED button
LED
What is WPS?
If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the
(WNCE4004)
NETGEAR router supports WPS. For non-NETGEAR routers, refer to the user manual to determine if the router supports WPS.
Once you know whether your router supports WPS, choose the appropriate installation method.
Installation with WPS
Step 1:
Connect the WNCE4004
to your TV, Xbox, or Blu-ray
player with the Ethernet
cable (included) and the
power adapter.
Step 2:
Wait until the Link LED on the
WNCE4004 blinks green. Press
the WPS button on the
WNCE4004. The WPS LED
blinks blue to show that the WPS
is running.
Step 3:
Push the WPS button on your router. When the
wireless connection has been established, the
Link LED changes color to indicate the quality of the
connection—solid green, solid amber, or solid red.
See
this document for more information about what these
colors mean.
Step 4:
Congratulations! Your installation is complete.
Ethernet
Power
ports
jack
WPS (Wi-Fi Protected Setup) is a simple and secured way to connect a device to an existing network.
Link LED Activity on the reverse side of
NOTE: Make sure that you go through the connection settings on your TV, Xbox, or Blu-ray player after the WNCE4004
is configured and connected. If asked for the type of connection, make sure that Wired is selected.
or symbols on the router to make sure that the
Installation without WPS
Step 1:
On the computer you will use to install the WNCE4004, disconnect
its wireless connection to the router and/or remove any Ethernet cable
currently connected to the computer. You can restore the connection
after the WNCE4004 installation is complete.
Step 2
: Connect the WNCE4004 to your computer, using the Ethernet
cable (included) and the power adapter.
Step 3:
WPS
Wait until the Link LED blinks green. Make sure that the computer
button
gets the IP address. Then, open your Internet browser—it
automatically takes you to the setup page. (If not, manually type
http://www.mywifiext.net as the browser address.) The default
user name is admin and the default password is password.
Follow the instructions on the setup page, then return to this guide
and continue to Step 4.
Step 4:
Disconnect the Ethernet cable from your computer.
Step 5:
Connect the WNCE4004 to your TV, xBox, or Blu-ray player.
WPS
button
Step 6:
Congratulations! Your installation is complete.