Printing The Printer Set-Up Information - Brother RJ-4030 User Manual

Chapter 7
Printing the Printer
Set-up Information
You can use the (Feed) button to print a
report that lists the following printer settings:
Program version
Printer usage history
Missing dot test pattern
RJ Utility setting information
List of transferred data
Network setting information
Wi-Fi setting information
Note
• You can use the RJ Utility to set in
advance which items will be printed
(see Printer Information Output Settings
uu page 33).
• The node name appears in the Printer
Settings. The default node name is
"BRWxxxxxxxxxxxx". ("xxxxxxxxxxxx"
is based on your printer's MAC
Address/Ethernet Address.)
a
Make sure that a roll of 101.6 mm
receipt paper has been loaded and the
RD Roll compartment cover is closed.
b
Turn on the printer.
c
Press and hold the
the POWER indicator starts blinking in
green.
The settings will be printed.
Note
• To print the Printer Settings, we
recommend to use 101.6 mm receipt
paper.
• This operation can also be performed
using the RJ Utility (see Print Printer
Information uu page 36).
52
7
(Feed) button until