Serial Cable Connection - Brother RJ-4030 User Manual

Note
• You can change the printer's network
settings using the Network Setting Tool
(see Network Setting Tool (RJ-4040 only)
uu page 38).
• The Network Setting Tool also allows you
to easily apply the network setting
changes to multiple printers. (see
Applying Setting Changes to Multiple
Printers uu page 40).

Serial Cable Connection

Please use the cable designed for your
Brother printer.
a
Make sure that the printer and the
computer are turned off before
connecting the serial cable.
b
Connect the printer end of the serial
cable to the serial port on the side of the
printer.
c
Connect the other end of the serial cable
to the serial port on the computer.
Note
• The default settings are as follows:
Baud rate: 9600 bps
Parity: None
Bit length: 8 bit
Flow control: Hardware
• To change these settings, refer to the
P-touch Template Command Reference.
The latest version is available for
download at:
http://solutions.brother.com
Choose your product. - [Manuals]
1
Setting Up the Printer
23
1