Set Tone Or Pulse Dialling Mode; Dial Prefix - Brother MFC-8880DN Quick Setup Manual

12
Set tone or pulse dialling
mode
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press Menu.
b
Press 0.
c
Press 4.
d
Press
Tone).
Press OK.
e
Press Stop/Exit.
13

Dial Prefix

The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
a
Press Menu.
b
Press 0.
c
Press 6.
d
Enter the Prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
• You can use the number 0 to 9 , # , l and !.
(Press Hook to display "!".)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed
break recall (hookflash), press Hook to enter
the break.
• If the pulse dialing mode is on, # and l are not
available to use.
e
Press Stop/Exit.
10
or to choose Pulse (or