HP Compaq dc5800 Quickspecs page 7

QuickSpecs
Standard Features and Configurable Components
Chipset
Processor and Speed*
One of the following
* Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each
processor family, not across different processor families.
Memory
Intel Q33 Express chipset
Intel Celeron Processors:
Intel Celeron 420 Processor (1.6-GHz, 512K L2 cache, 800-MHz FSB)
Intel Celeron 430 Processor (1.8-GHz, 512K L2 cache, 800-MHz FSB)
Intel Celeron Dual-Core Processors
Intel Celeron E1200 Processor (1.6-GHz, 512K L2 cache, 800-MHz FSB)
Intel Pentium Dual-Core Processors:
Intel Pentium E2160 Processor (1.8-GHz, 1-MB L2 cache, 800-MHz FSB)
Intel Pentium E2180 Processor (2.0-GHz, 1-MB L2 cache, 800-MHz FSB)
Intel Pentium E2200 Processor (2.2-GHz, 1-MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo Processors:
Intel Core 2 Duo E4500 Processor (2.20-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E4600 Processor (2.40-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E4700 Processor (2.60-GHz, 2MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E6550 Processor (2.33-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E6750 Processor (2.66-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8200 Processor (2.66-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8300 Processor (2.83-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8400 Processor (3.0-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Quad Processors:
Intel Core 2 Quad Q6700 Processor (2.66-GHz, 8 MB L2 cache, 1066-MHz FSB)
Intel Core 2 Quad Q9300 Processor (2.50-GHz, 6 MB L2 cache, 1333-MHz FSB)
DDR2 SYNCH DRAM NON-ECC MEMORY
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied
sizes. This chart does not represent all possible memory configurations. The Intel Q33 Express
chipset supports non-ECC DDR2 PC2-6400 (800-MHz) memory.
CAUTION: You must shut down the computer and disconnect the power cord before adding or
removing memory modules. Regardless of the power-on state, voltage is always supplied to the
memory modules as long as the computer is plugged in to an active AC outlet. Adding or
removing memory modules while voltage is present may cause irreparable damage to the memory
modules or system board.
HP recommends dual-channel symmetric configurations for maximum performance.
For best performance, add the same amount of total memory to each channel and do not mix
speeds. For dual-channel symmetric performance, the total amount of memory in each channel
must be equal. If speeds are mixed, speed will default to the slowest DIMM.
DA - 12863 U.S. QuickSpecs — Version 3 — 4/2/2008
HP Compaq dc5800 Business PC
MT SFF
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
Page 7