Restore Factory Settings; Alarm Clock (Menu 5) - Nokia 5100 User Manual

When the fixed dialling is on,
GPRS connections are not
possible except while sending
text messages over a GPRS
connection. In this case, the
recipient's phone number and the
message centre number have to
be included on the fixed dialling
list.
• Closed user group
service that specifies the group of
people whom you can call and
who can call you. For more
information contact your
network operator or service
provider.
• Security level. Select
the phone will ask for the
security code whenever a new
SIM card is inserted into the
phone.
Select Memory
will ask for the security code
when SIM card's memory is
selected and you want to change
the memory in use, (see
"Selecting the phone book
settings" on page 13) or copy
from one memory to another
("Copying phone books"
15).
• Access codes to change the
security code, PIN code, PIN2
code or barring password. Codes
can only include numbers from 0
to 9.
is a network
Phone and
and the phone
on page
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s

Restore factory settings

To reset some of the menu settings
to their original values, press Menu,
and select Settings
factory settings. Key in the security
code and press OK. Note that the
data you have keyed in or
downloaded, for example, the names
and phone numbers saved in the
phone book are not deleted.
■ Alarm clock
(Menu 5)
The alarm clock uses
the time format set for the clock. The
alarm clock works even when the
phone is switched off.
Press Menu, and select
Key in the alarm time and press OK.
To change the alarm time, select On.
When the alarm time expires
The phone will sound an alert tone,
and flash Alarm! and the current
time on the display.
Press Stop to stop the alarm. If you
let the phone continue to sound the
alarm for a minute or press Snooze,
the alarm stops for about ten
minutes and then resumes.
and Restore
Alarm clock.
39