Phone Settings - Nokia 5100 User Manual

M e n u f u n c t i o n s
Automatic redial
Select Automatic redial. Select
and your phone will make up to ten
attempts to connect the call after an
unsuccessful call attempt.
Speed dialling
Select Speed dialling. Select
the names and phone numbers
assigned to the speed dialling keys,
from to
pressing and holding the
corresponding number key.
Call waiting
Select Call waiting
the network will notify you of an
incoming call while you have a call
in progress (network service). See
"Call waiting" on page 11.
Summary after call
Select Summary after
On and the phone will after each call
briefly display the duration and cost
(network service) of the call.
Send my caller identity
Select Send my caller
Select Yes and your phone number
will be displayed to the person you
are calling (network service). Select
Set by network and the setting
agreed upon with your service
provider is used.
34
On
On and
, can be dialled by
- Activate and
call. Select
identity.
Copyright © 2004 Nokia. All rights reserved.
Line for outgoing calls
Line for outgoing calls is a network
service to select the phone line 1 or
2, that is subscriber number, for
making calls.
Select Line for outgoing
select Line 2 and have not
subscribed to this network service,
you will not be able to make calls.
However, calls on both lines can be
answered regardless of the selected
line.
If supported by your SIM card, you
can prevent the line selection by
selecting the option Lock.
For more information on availability,
contact your network operator or
service provider.
Tip: In standby mode you can
switch from one line to the
other by pressing and
holding

Phone settings

Note: The following phone settings
can all be found by pressing first
Menu, and selecting Settings,
Phone settings, and then selecting
the needed setting.
Language
Select Language. Select the
language for the display texts. If
Automatic is selected, the phone
selects the language according to
the information on the SIM card.
calls. If you
.