Mounting; Orientation; Rigging - Chauvet Colordash Par-Tri User Manual

Mounting

Orientation

Rigging

Procedure
Product Mounting
Diagram
COLORdash™ Par-Tri User Manual Rev. 03
Before mounting this fixture, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes section.
CHAUVET® recommends following the general guidelines below when mounting the
COLORdash™ Par-Tri.
·
When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
·
Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
·
If hanging this fixture, make sure that the location where you are mounting the
fixture can support its weight. Please see the Technical Specifications section of this
manual for the weight requirement of this fixture.
The COLORdash™ Par-Tri comes with a double bracket yoke to which you can attach
one or two "C" or "O" clamps. The yoke serves also as a floor mount support. You must
supply your own "C" or "O" clamps as well as your own safety cable. Always make sure
that make sure that the clamps and mounting points are capable of supporting the
weight of this fixture. CHAUVET suggests using two clamps per fixture.
C clamp
(not included)
Floor Mounting
Overhead Mounting
Setup
-7-