Charging Your Ipod; Listening To Ipod; Listening To Non-Docking Ipod Or Other Portable Audio Devices - Timex Ti700 Quick Start Manual

For ipod
Table of Contents

Advertisement

Note: Please make sure you are using the correct insert for your iPod (see Install iPod Insert) and that it is properly docked
into the Ti700. Failure to do so may damage your iPod or the connector.
1. While your iPod is docked in the unit and the unit is connected to AC power, it recharges until fully charged. Note that
other non-docking iPods will NOT charge.
1. Dock an already playing iPod, the Ti700 will automatically turn on and you will hear the music playing from your iPod.
Note: If the playing song/music loudness on the iPod itself is too low, Ti-700 may not detect the iPod is in play mode.
Press the
iPod Play/Pause Button on the Ti700 or remote control twice to play it.
2. When the iPod is docked and in standby mode, press the
to play it. The iPod Icon will appear on the display, showing iPod playing mode.
3. Press the
iPod Play/Pause Button again to pause play; press again to resume it.
4. Press the
Volume+ and
5. Press
<< or
>> Button on the Ti700 or remote control to go to the previous or next track. Press and hold while a
track is playing for high speed forward or reverse music search of the current track.
6. To turn off the unit, press the
iPod will continue charging while in the dock.

Listening to non-docking iPod or other portable audio devices

If you are using an iPod without a docking port or another MP3 player or other portable audio device, you can still play it
through the Ti700 via the Line-in Jack. NOTE: you cannot charge a device through the line-in jack.
1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your device and the other end of
the patch cord into the Ti700
2. Press
iPod Play/Pause Button on the Ti700 or remote to turn the Ti700 on. The iPod Icon will appear on the top of
the display, indicating Line-in playing mode.
3. Turn on and play your device.
4. Press the
Volume+ and
volume. You may need to adjust your device volume, too.
5. To turn off the unit, press the
remember to turn off your device, too.
<<

Charging Your iPod

Listening to Your iPod
Volume– Button on the Ti700 or remote control to adjust the system volume.
Alarm Reset/Power On/Off Button on the Ti700 or remote control to turn it off. The
Line-in Jack, located on the back of the unit.
Volume– Button on the right of the Ti700 or use the remote control to adjust the system
Alarm Reset/Power On/Off Button on the Ti700 or remote control to turn it off. Please
iPod Play/Pause Button on the Ti700 or remote control

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents