Belkin Surf+ F7D2102 User Manual page 31

TrOUblEshOOTing
The adapter does not perform or connection is slow
when computer has a built-in wired Ethernet card.
This condition occurs if your computer has an active Ethernet
card while your Adapter is also active . This happens because
Windows must now handle two active network connections .
You must disable the Ethernet card from your computer
under "Network Adapters" in the Device Manager .
What's the difference between 802.11g and 802.11n?
Currently there are three commonly used wireless networking
standards, which transmit data at very different maximum
speeds . Each is based on the designation for certifying network
standards . The most common wireless networking standard,
802 . 1 1g, can transmit information up to 54Mbps; 802 . 1 1a
also supports up to 54Mbps, but in the 5GHz frequency;
and 802 . 1 1n specification can connect at up to 300Mbps .
See the following chart for more detailed information .
29