Chapter 1 Introduction This Chapter provides an overview of the Universal Wireless HDTV Adapter's features and capabilities. Congratulations on the purchase of your new Universal Wireless HDTV Adapter. The Univer- sal Wireless HDTV Adapter provides an easy solution to get your HDTV on your network with fast and reliable access to the Internet.
LEDs Front-mounted LED The Universal Wireless HDTV Adapter has 1 LED. • On (Blue)- Good strength of signal or WPS connection is estab- POWER LED lished. • On (Amber) - Weak strength of signal or WPS connection is failed. • Blinking (Blue) - When WPS button is pressed, this LED starts blinking.
Rear Panel Use standard LAN cable (RJ45 connectors) to connect your HDTV to LAN Port the port. (10/100) Connect the supplied USB cable for power. USB Port...
Chapter 2 Initial Installation This Chapter covers the software installation of the Universal Wireless HDTV Adapter. Requirements • Network cable. Use standard 10/100BaseT network (UTP) cable with RJ45 connector. • To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g, IEEE 802.11b or IEEE 802.11n specifications.
Chapter 3 Setup This Chapter provides Setup details of the Universal Wireless HDTV Adapter Configuration Program The configuration program has been tested on the following browsers: • Apple Safari 4.1, 5 Mozilla Firefox 3.5, 3.6 • • Internet Explorer V6 or later •...
IEEE802.11a (up to 54Mbps) • Standards • IEEE802.11b (up to 11Mbps) • IEEE802.11g (up to 54Mbps) • IEEE 802.11n (up to 300Mbps) Operating Spectrum Selectable Dual-Band 2.4GHz and 5GHz PPTP, IPSec pass-through Security WEP 64/128Bit, WPA-PSK, WPA2-PSK, Wi-Fi Protected Setup Technical Support http://www.belkin.com/support...
Page 9
In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the...
Page 10
Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may desig- nate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, F7D4555v1, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inter- ference, and (2) this device must accept any interference received, including interference that may cause undesired operation.