Casio Privia PX-100 User Manual page 2

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Important!
Please note the following important information before using this product.
• Before using the optional AD-12 Adaptor to power the unit, be sure to check the AC Adaptor for any
damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage.
Never let children use an AC adaptor that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-12 adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
CASIO ELECTRONICS CO., LTD.
Unit 6, 1000
North Circular Road
London NW2 7JD, U.K.
This mark is valid in the EU countries only.
Please keep all information for future reference.
PX100_es_cover_1-4.p65 2
NOTICE
412A-E-002A
MIDI Implementation Chart
Model PX-100
Function ... Transmitted
Basic Default 1
Channel Changed 1-16
Default Mode 3
Mode Messages X
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
Altered
Note 21-108
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
Number True voice
Velocity Note ON O 9nH V = 1-127
Note OFF X 8nH V = 64
After Key's X
Touch Ch's X
Pitch Bender X
0, 32 O
1 X
Control 6, 38 O*1
Change 7 O
10 O
11 O
64 O
66 O*2
67 O*2
91 O
93 O
100, 101 O
120 O
121 O
Program O 0-7, 32
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
Change :True #
System Exclusive O*3
System : Song Pos X
Common : Song Sel X
: Tune X
System : Clock O
Real Time : Commands O
Aux : Local ON/OFF X
: All notes OFF O
Messages : Active Sense X
: Reset X
Remarks
* 1 Fine tune and coarse tune send/receive, RPN Null, and pitch bend sense receives
* 1 Afinación fina y envío/recepción de afinación gruesa, RPN nulo y recepción de captación de inflexión
.
de altura tonal
* 2 In accordance with pedal
* 2 De acuerdo al pedal.
* 3 • Reverb type [F0][7F][7F][04][05][01][01][01][01][01][00][vv][F7]
vv=00: Room1, 01: Room2, 02: Hall1, 03: Hall2
• Chorus type [F0][7F][7F][04][05][01][01][01][01][02][00][vv][F7]
vv=00: Chorus1, 01: Chorus2, 02: Chorus3, 03: Chorus4
* 3 • Tipo de reverberación [F0][7F][7F][04][05][01][01][01][01][01][00][vv][F7]
vv=00: Room1, 01: Room2, 02: Hall1, 03: Hall2
• Tipo de chorus [F0][7F][7F][04][05][01][01][01][01][02][00][vv][F7]
vv=00: Chorus1, 01: Chorus2, 02: Chorus3, 03: Chorus4
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO
412A-E-055A
03.11.7, 4:40 PM
Version: 1.0
Recognized Remarks
1-16
1-16
Mode 3
X
0-127
0-127
O 9nH V = 1-127
X 9nH V = 0, 8nH V = ** ** = no relation
X
X
O
O Bank select
O Modulation
O*1 Data entry
O Volume
O Pan
O Expression
O Damper
O Sostenuto
O Soft
O Reverb send
O Chorus send
O RPN LSB, MSB
O All sound off
O Reset all controller
O 0-7, 32
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
O*3
X
X
X
X
X
X
O
O
X
O : Yes
X : No