Cisco DPC User Manual page 90

How Do I Configure My DOCSIS Residential Gateway?
Field Name
Connected Clients
Function Keys
The following function keys appear on the Setup Wireless - Access Control page.
Key
Apply
Clear All
Remove
Add
Configuring Remote Bridges
Use the Setup Wireless - Bridging page to configure your configure remote bridges.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the wireless home
gateway default wireless advanced settings.
Click Bridging in the Wireless section of the Setup page to access the Setup Wireless
- Bridging page.
Setup Wireless Access Control Page Example
The following illustration is an example of the Setup Wireless - Bridging page.
90
Description
Displays the Host Name, IP Address, and Client ID
of wireless clients that are connected to (associated
with) the gateway modem
Description
Applies and saves the values you enter into the
fields without closing the screen
Clears the Access List
Removes entries from the Access List
Adds a client to the Access List using the MAC
address of the client
4028315 Rev B