Canon imageRUNNER Advance 6275 Manual page 52

Item
Capacity Per Tray
Max. Stapling Capacity/
Available Staple Size
Power Source/Maximum Power
Consumption
Dimensions (H x W x D)
Weight
Installation Space (W x D)
50
Staple mode
Tray B, Tray C:
LTR and EXEC:
1,300 sheets/100 sets (or 7 3/8" (188 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets/50 sets (or 3 3/4" (96 mm) in height)
Z-Fold mode (when the Document Insertion/Folding Unit-H1 is attached.)
Tray B, Tray C:
11" x 17":
Up to 30 sheets, 10 sheets per set when stapling
LGL and LTRR:
Up to 10 sheets
No Collating/Collate/Group mode with diff erent paper sizes
Tray B, Tray C:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode with diff erent paper sizes
Tray B, Tray C:
650 sheets/50 sets (or 3 3/4" (96 mm) in height)
*1 Up to 650 sheets (or 3 3/4" (96 mm) in height) when thin paper or custom paper lighter than 16 lb bond
(59 g/m 2 ) is selected.
When the standard staple cartridge is attached:
(The maximum stapling capacity may vary, depending on the paper type and weight.)
LTR and EXEC:
50 sheets (20 lb bond (80 g/m
11" x 17", LGL, and LTRR:
30 sheets (20 lb bond (80 g/m
Corner Staple mode/Double Staple mode:
11" x 17", LGL, LTR, LTRR, and EXEC
From the main unit/
Approximately 147 W (including the External 2/3 Hole Puncher-A1)
Approximately 136 W (excluding the External 2/3 Hole Puncher-A1)
44 1/8" x 25 3/8" (30" *1 ) x 25 7/8" (1,121 mm x 644 mm (761 mm
*1 When the auxiliary tray is extended.
106 lb (48 kg)
Without the upright control panel:
67 1/4" x 30 3/8" (1,708 mm x 770 mm)
With the upright control panel:
88 1/2" *1 x 30 3/8" (2,247 mm x 770 mm)
(when the multi-purpose tray and the auxiliary tray is extended.)
*1 To the right edge of the upright control panel in the rightmost position.
Specifi cations
*1
2
))
2 ))
*1 ) x 656 mm)