Advertisement
ERRATA
1.
Fan Control Defaults Incorrectly Set in BIOS for Onboard Hardware
Management ASIC
P
:
Default BIOS settings on desktop boards that implement the Intel
ROBLEM
fan control are incorrect, which could result in improper system cooling.
I
:
The maximum front and rear system chassis fan speeds are limited to 30% of maximum,
MPLICATION
irrespective of the actual chassis temperature. Under certain circumstances, this fan speed limitation may
not provide adequate system cooling.
NOTE: The CPU fan is not controllable by the desktop board and is not directly impacted.
W
:
Disable fan control by changing the 'F
ORKAROUND
menu under the 'A
' tab, 'F
DVANCED
speed, which will allow maximum system cooling.
S
:
This erratum was fixed in BIOS revision SV84510A.86A.0009.P05.
TATUS
2
Intel
82801DB I/O Controller Hub 4 (ICH4) Erratum 8
P
:
For a complete description of the ICH 4 erratum 8, see the Intel
ROBLEM
(ICH 4) Specification Update, order number 290745 found at
http://developer.intel.com/design/chipsets/specupdt.
I
:
For a complete description of the ICH 4 erratum 8, see the Intel 82801DB I/O Controller Hub 4
MPLICATION
(ICH 4) Specification Update, order number 290745 found at
http://developer.intel.com/design/chipsets/specupdt.
W
:
None.
ORKAROUND
S
:
This erratum may be fixed in a future chipset stepping.
TATUS
3
Supervisor Password Cleared When 256MB or Greater System
Memory is Used
P
:
If 256MB or more system memory is added to a system the Supervisor password is cleared.
ROBLEM
I
:
Supervisor password cannot be used with 256MB or more of system memory.
MPLICATION
W
:
None.
ORKAROUND
S
:
This erratum may be fixed in a future BIOS revision.
TATUS
Intel
Desktop Board D845PESV Specification Update
C
AN
ONTROL
C
' menu. This will allow the system fans to run at full
AN
ONFIGURATION
Precision Cooling Technology
' setting to "Disabled" in the BIOS setup
82801DB I/O Controller Hub 4
5
Advertisement
