Description Of The Controls - Zanussi FLS472C Instructions Manual

DESCRIPTION OF THE CONTROLS

Control panel
ALGODON - LINO
1 + BLANCO MUY SUCIO
2 + BLANCO SUCIO NORMAL
3 60° COLORES RESISTENTES
4 40°
COLORES DELICADOS
5 ACLARADOS-BLANQUEADOS
6
PERFUMADO-SUAVIZADO
7 CENTRIFUGADO
1. Washing powder dispenser
AL020
«Prewash» symbol shows the compartment
for the prewash detergent.
«Wash» symbol shows the compartment for
the washing detergent.
«smooth» symbol shows the compartment
for the smoothing additives.
«bleach» symbol shows the compartment for
the bleaching additives.
2. On/of lamp
It lights when the appliance is operating.
3. "COLD WASH" button
Pressing this button when starting any program
it will be run through with cold water. All other
features of the program as intensity and duration
remain unchanged. Advisable for synthetic and
delicate fabrics: curtains, stores and other not
too dirty fabrics.
26
F L S - 4 7 2 C
SINTETICOS-MIXTOS-LANA-SEDA
8 60° RESISTENTES MUY SUCIOS
60°
9 RESISTENTES SUCIO NORMAL
10 40° DELICADOS
11 40°
LANA-SEDA
12 ACLARADOS DELICADOS
13
PERFUMADO-SUAVIZADO
14 DESCARGA
1 2
The dispenser is
provided with 4
compartments marked
with the following
symbols:
3 4 5
4. "1/2 LOAD" button
Pressing this button before starting the "intense"
programmes there will be one rinse less which
leads to energy and water saving.
5. button
Pressing this button when starting 1 or 2
programmes, the temperature will be increased
from 60°C to 90°C.
6. Program selector
To select the required program turn the control
clockwise until the marker on the top coincides
with the number of the required program
(reference mark on the control panel). If at any
chance you pass by the required number NEVER
TURN THE CONTROL ANTICLOCKWISE just
continue clockwise until the required number is
reached again.
6