Table of Contents
Advertisement
USE OF CONTROLS
The user must
be familiar
with the machine controls and
use
them
correctly
for best
washing results.
1]
WASHING POWDER
DISPENSER DRAWER
The washing powder and
additives must be placed in
this drawer before starting
the programme.
There is also a brief guide
to the washing programmes
on the drawer itself.
2 |
PILOT LIGHT {+
This lights up when the start/
stop button is depressed and
goes out when the button is
pressed again.
EI
START/STOP BUTTON D
By depressing this button
the machine starts operating.
When depressing it again, the
machine stops.
The
push
button
is
provided with a child-proof
safety lock.
Push the small slider placed
on the button to lock it in the
«off» position.
BUTTON
By pressing the heavy soil
button, the machine will take
in cold water only on program-
mes with a water temperature
of 60°C and hotter.
These would normally be hot
and cold, or hot fill only.
The water is then gradually
heated
to
the
required
temperature.
The effect is to improve the
overall
wash
performance,
particularly
on
biological
stains such as egg, blood and
grass
stains,
and
heavily
soiled
fabrics,
since
the
longer «cool-soak» phase as
the water heats up provides
the right conditions for the
powder
and
the
water
temperature to interact, and
achieve
the
best
possible
results.
5
HALF LOAD
BUTTON (2
Press
this
button
when
washing
a small
cotton
or
linen load (max. 2.25 kg) to
reduce
water consumption:
the
number
of
rinses
is
reduced from 5 to 4.
To
select
the
required
programme, press and turn
this dial clockwise
until the
marker at the top of the dial
coincides
with the required
programme letter.
11
Advertisement
Table of Contents
