Use; Control Panel; Controls - Zanussi FLD606 User Manual

Use

Control panel

1 Programme chart
It will help you to choose the most suitable washing
programme for your laundry.
2 Spin speed reduction button
By depressing this button the spin speed is reduced
as follows:
G
cotton and linen: from 600/800 rpm according to
the model to 400 rpm
G
synthetics, delicates and wool:
from 750 to 400 rpm for FLD 806 and
from 550 rpm to 400 rpm for FLD 606.
3 Intensive rinse button
By depressing this button on programmes for cotton
and linen the machine will perform the rinses with
high water level.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
4 Anti-crease button
This option can be used for all programmes.
The last rinse water is not emptied out, so as to
avoid creasing if the laundry is not removed from the
machine immediately after washing.
The water can be emptied out by pressing the button
again (emptying will be followed by a spin) or by
selecting the drain programme "R".
If the button is not pressed, the programmes end
with a spin.
5 On/Off button
Press this button to start the machine. The same
button is used to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the On/Off button.
6 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value.
Depress the dial to pop it out. (FLD 806)
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
7 Mains-on light
It comes on when the machine starts operating and
goes out at the end of the programme.
8 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
Depress the dial to pop it out. (FLD 806)
32
).