Related Manuals for Zanussi FLI 1003
Summary of Contents for Zanussi FLI 1003
-
Page 1: Washing Machine
INSTRUCCIONES PARA INSTALACION Y USO INSTRUÇÕES PARA A INSTALAÇÃO E A UTILIZAÇÃO INSTALLATION AND INSTRUCTION MANUAL LAVADORA MÁQUINA DE LAVAR ROUPA WASHING MACHINE FLI 1003 124978890... -
Page 2: Table Of Contents
CONTENTS Warnings . Page Installation Page Transit devices Page Positioning. Page Water inlet . Page Water drainage Page Electrical connection . Page Building-in . Page Use. Page Control panel . Page Detergent dispenser drawer. Page Controls Page Washing hints . Page Detergents and additives Page... -
Page 3: Warnings
WARNINGS It is important that this instruction book be kept Always check that water has emptied out before with the appliance for future reference. If you sell opening the door. If not, drain the water following or give the appliance away, make sure that the the instructions in the instruction book. -
Page 4: Installation
INSTALLATION Transit devices Positioning All transit bolts and packing must be removed before Install the machine on a flat hard floor. using the appliance. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the Proceed as follows: machine does not touch the wall or other kitchen Using a spanner, un-... -
Page 5: Water Drainage
Water drainage Electrical connection The end of the drain hose can be positioned in three This machine is designed to operate on a 220-230 V, ways: single-phase, 50 Hz supply. Hooked over the edge Check that your domestic electrical installation can of a sink using the take the maximum load required (2.2 kW), also taking plastic hose guide sup-... -
Page 6: Building-In
Building-in c) Mounting the door Fix the hinges to the machine by means of the M5x8 This appliance has been screws (3-Fig. B). The hinges can be adjusted to com- designed to be built into pensate for possible uneven thickness of the door. the kitchen furniture. -
Page 7: Use
Control panel 1 Detergent dispenser drawer and pro- 5 Rinse hold (anti-crease) button gramme card Use only with “gentle” programmes. The last rinse water is not emptied out, so as to avoid Symbols creasing if the laundry is not removed from the Prewash machine immediately after washing. -
Page 8: Washing Hints
Washing hints Removing stains Sorting the laundry Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them Follow the wash code symbols on each garment label prior to washing. and the manufacturer’s washing instructions. Blood: treat fresh stains with cold water. -
Page 9: Detergents And Additives
Degrees of water hardness Detergents and additives Degrees Good washing results also depend on the choice of Level Characteristic detergent and use of the correct quantities to avoid German French °dH °T.H. waste and protect the environment. Although biodegradable, detergents contain substances which, 00-07 0,0-15 soft... - Page 10 ENERGETIC PROGRAMMES FOR COTTON AND LINEN Maximum load: 5 kg Possible Progr. Temp. Type of laundry Cycle description options Prewash Whites with prewash Wash at 60°-90°C 60°-90° heavy soiled Rinses Spin Wash at 60°-90°C Whites without prewash • 60°-90° • Rinses normally soiled Spin...
- Page 11 GENTLE PROGRAMMES FOR SYNTHETICS, MIXED FIBRES, DELICATES AND WOOLLENS Maximum load: 2 kg, woollens: 1 kg Possible Progr. Temp. Type of laundry Cycle description options Wash at 30°-60°C Synthetics without prewash 30°-60° Rinses normally soiled Short spin Wash at 30°-40°C 30°-40°...
- Page 12 Wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not Delicate wash...
-
Page 13: Operating Sequence
Operating sequence Important: 5 Select the temperature Before washing your first load of laundry, we recom- Press the temperature mend that you run a cotton cycle at 60°C, with the selector dial in to pop it machine empty, in order to remove any manufactur- out and turn it to the re- ing residue from the drum and tub. -
Page 14: Maintenance
MAINTENANCE Bodywork Drain filter The drain filter collects threads and small objects Clean the outside of the machine with warm water and inadvertently left in the laundry. Check regularly that a neutral, non-abrasive household detergent. Rinse the filter is clean. with clean water and dry with a soft cloth. -
Page 15: Something Not Working
SOMETHING NOT WORKING? Problems which you can resolve yourself Unsatisfactory washing results: Too little detergent or unsuitable detergent has The machine does not start up: been used. Check that the door is firmly closed. Stubborn stains have not been treated prior to washing.