Zanussi FL 984 CN Installation And Instruction Manual page 19

Problem
The machine vibrates or is noisy:
The door will not open:
Spinning starts late or the machine does
not spin:
Water is not visible in the machine:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make a
note of the model, serial number and purchase date of
your machine: the Service Centre will require this
information.
70
Possible cause
Check that all the transit bolts and packing have
been removed.
Check that the machine is not resting against
anything.
Check that the support feet are resting firmly on the
ground.
Check that the laundry is evenly distributed in the drum.
Maybe there is very little laundry in the drum.
The programme is still running.
The door lock has not yet been released, the door
locked light is on.
There is water in drum.
The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 6 minutes, the
laundry is still not evenly distributed in the drum,
the machine will not spin. In this case, redistribute
the load manually and reselect the spin programme.
The machine, which is the result of modern
technology, runs in a very economical way with
low water consumption. Performance is
nevertheless excellent.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042