Loading Cutlery And Dishes - Zanussi ZDT110 User Manual

156997240en.qxp 12/27/2006

Loading cutlery and dishes

The following items are not suitable for use
●
in the dishwasher:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Plastic items that are not heat resistant
- Older cutlery with glued parts that are not
temperature resistant
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Steel items prone to rusting
- Wooden platters
- Items made from synthetic fibres
Load cutlery.
For best results we
recommend you to use
the cutlery grid provided
(if the size and
dimensions of the
cutlery allow it.
1:39 PM Page 13
●
●
IMPORTANT!
Before closing the door, ensure that the spray
arms can rotate freely.
Place knives and other Load the lower basket.
items of cutlery with Arrange serving dishes and large lids around the
sharp points or edges edge of the basket.
with their handles facing
upwards.
Risk of injury!
When loading the dishwasher, make sure
that you:
- Remove all left over food and debris.
- Soften remnants of burnt food in pans
- Load hollow items such as cups, glasses,
pans, etc. with the opening downwards so
that water cannot collect in the container
or a deep base.
Dishes and items of cutlery must not lie
-
inside one another, or cover each other.
- To avoid damage to glasses, they must
not touch.
- Lay small objects in the cutlery basket.
Plastic items and pans with teflon have a
tendency to retain water drops; these
items will not dry as well as porcelain and
steel items.
13