Table of Contents
Advertisement
Series 9000E Scanner/Decoder
1
N/C
2
TXD
3
RXD
4
N/C
5
GND
6
N/C
7
N/C
8
N/C
9
N/C
Pin 2
TRANSMIT DATA - Data Transmitted from the SERIES 9000E
SCANNER/DECODER to the local programming terminal.
Transmission format is serial ASCII, 1 Start Bit, 8 Data Bits, No
Parity Bit, 1 Stop Bit. Baud rate is set at 9600.
Pin 3
RECEIVE DATA - Data transmitted from the local programming
terminal to the Series 9000E Scanner/Decoder. Transmission
format is serial ASCII, as above.
Pin 5
COMMON GROUND - Ground terminal common to both
Transmit and Receive Data Lines.
HOST PORT
The Host Port is designed to provide RS-232, RS-422, or optional RS-
485 communications to a host computer or other intelligent peripheral
device. The type of communications used is user-programmable and is
selected on Page 3 of the Programming Menus. When selecting RS-
232
No Connection
Transmit Data
Out
Receive Data
In
No Connection
Common Ground
No Connection
No Connection
No Connection
No Connection
4-2
Advertisement
Table of Contents
