Cisco DPC2425 User Manual page 82

How Do I Configure My DOCSIS Residential Gateway?
Field Name
WPA Pre-Shared Key
RADIUS Server
RADIUS Port
RADIUS Key
Group Key Rotation
Interval
82
Description
Allows you to set a WPA Pre-Shared key. Enter a text
string in this field. The text string or phrase is used to
generate a unique set of encryption keys for your
network. Use this string to set up wireless devices in your
network.
The factory default security key is the 9-digit serial
number of the gateway. For example: 20167792. See How
Do I Set Up My High-Speed Internet Access Account? for
the location of the serial number on the label.
The PSK can be either a text string or a 64 character
hexadecimal number.
The text string must be an ASCII character string with
a minimum of 8 characters but no more than 63.
Note: Not all wireless adapter devices support PSK. For
these devices, you must enter the encryption keys exactly
as they appear in the in wireless gateway fields in the
preceding illustration of the Setup Wireless Security page.
Allows you to enter the IP address of the RADIUS server
used for authentication and encryption key derivation.
This field is used with 802.1x and WPA Network
Authentication.
The factory default for this field is 0.0.0.0.
Determines the port number of the RADIUS server. The
port number is usually 1812 (factory default) or 1645,
depending on the server used.
This field is used with 802.1x and WPA Network
Authentication.
Allows you to set the Shared Secret key for your RADIUS
connection.
The factory default for this field is empty.
This field is used with 802.1x and WPA Network
Authentication.
Allows you to set the WPA Group Key Rotation Interval
in seconds. This only applies when WPA or WPA2
Network Authentication is enabled.
Set this value to 0 (factory default) to disable periodic
rekeying. The valid range is 1 to 4,294,967,295 seconds.
4028315 Rev A