Advertisement
Seat
Height
Adjuster
12
• Push each seat height adjuster to be sure they are completely on the
seat bottom tubes.
• Insert a #8 x 1,9 cm screw through each seat height adjuster and the
ends of the seat bottom tube. Tighten the screws. This may require
extra force.
Height
Adjuster
Seat
Bottom
Tube Ends
Assembly
Seat
Hole
13
• Lift the assembly upright.
• From the front of the assembly, place the pad onto the seat.
• Lift the bottom of the pad. Insert the two elastic loops on the pad
through the holes in the seat bottom.
• From the back and bottom of the seat, hook the elastic loops to the
tabs on the seat.
8
Pad
Elastic Loops
Hole
Tabs
Elastic Loops
Advertisement
