Advertisement
Quick Links
Advertisement
Related Manuals for Fisher-Price H7182
Summary of Contents for Fisher-Price H7182
- Page 1 H7182 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fi sher-price.co.uk...
-
Page 2: Consumer Information
Consumer Information IMPORTANT! Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child's reach. WARNING • Please read these instructions before assembly and use of this product. • Adult assembly is required. Prevent serious injury or death from falls •... - Page 3 Parts Seat Back 2 Frames Seat Bottom Footrest Back Base Front Base 2 Seat Bottom Tubes Food Tray Hinge Rod Base Tray 2 Teether Toys Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Toy Bar #8 x 1,9 cm Screws –...
- Page 4 Assembly IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. Footrest Seat Bottom •...
- Page 5 Assembly Insert Screws Here Hinge Hinge Rod • Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom. Tighten the screws. This may require • Turn the seat assembly face down. extra force. • Insert the hinge rod through the hinge on the seat back and seat bottom, as shown.
- Page 6 Assembly Frame Leg Seat Height Adjusters Position 4 Frame Decorated Side Press Lever Frame Back Legs • While pressing the levers on the seat height adjusters, lift them to position 4 on the frame front legs, as shown. Back Seat Assembly Base Screw Retainers Sockets...
- Page 7 Assembly Push Push Screw Seat Bottom Retainers Tube Ends Front Base • Insert the frame front legs onto the front base. • Push each seat height adjuster to be sure they are completely on the • Fit a screw retainer over a hole in the front leg. seat bottom tubes.
- Page 8 Assembly Seat Seat Height Height Adjuster Adjuster Elastic Loops Seat Bottom Hole Hole Tube Ends • Push each seat height adjuster to be sure they are completely on the seat bottom tubes. • Insert a #8 x 1,9 cm screw through each seat height adjuster and the ends of the seat bottom tube.
- Page 9 Assembly Slot Crotch Belt Bottom Slots • Insert the crotch belt through the slot in the pad. Make sure the crotch belt is not twisted. Shoulder • Lift the top of the pad. Portion • Thread the waist/shoulder belts through the bottom slots in the back of the seat pad.
- Page 10 Assembly • From behind the seat, be sure the shoulder portion of the waist/shoulder belts are secure in the seat back slots. Upper Shoulder Belt Slots • Fit the pad strap through the handle and press it to the Shoulder Portion fastener on the back of the seat.
-
Page 11: Battery Installation
Battery Installation Secure Child WARNING 1,5V x 3 "AA" (LR6) Prevent serious injury or death from falls or sliding out. The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to Battery Compartment hold the child in the chair. - Page 12 Secure Child Anchored Anchored Free End Free End Buckle Tighten Loosen To tighten the waist belts: • Feed the anchored end of the waist belt up through the buckle to form a loop • Pull the free end of the waist belt •...
- Page 13 Using the Trays and Toys WARNING Prevent serious injury or death from falls or sliding out. The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. Base Tray •...
- Page 14 Using the Trays and Toys Electronic Toy Food Tray Button Base Tray Groove Base Tray • Insert the tab on the edge of the electronic toy into the groove in the front of the base tray. • Push the electronic toy down to secure in place. •...
-
Page 15: Adjusting The Seat
Adjusting the Seat Brakes WARNING WARNING Prevent serious injury or death from falls Prevent serious injury or death from or sliding out. falls or sliding out. It is recommended • Always leave wheels locked. that only children capable of sitting upright •... - Page 16 • Fit the electronic toy to the tab on the back of the high chair, as shown. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.