Loading The Machine, Use Of The Lower Basket, Use Of The Upper Basket - Zanussi ZD852I Instruction Booklet

Loading your Machine
Before placing dishes in the machine, remove any
large scraps of food from the plates (small bones,
toothpicks, fish bones, scraps of meat and vegeta-
bles, fruit skins etc.) to avoid clogging the filters and
consequently reducing performance. Open the door
and slide out the baskets to load the dishes.
Use of the Lower Basket
The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery
etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the upper
spray arm can turn freely.
UI22
UI21
Cutlery should be placed in the removable cutlery bas-
ket with the handles facing downwards. If the handles
protrude from the bottom of the basket, obstructing the
lower spray arm, load the cutlery with the handles facing
upward.
Mix spoons with the other cutlery to prevent them
sticking together.
Teaspoons may be loaded into the special slots pro-
vided in the cutlery basket handle.
The cutlery basket is in two
parts which can be separat-
ed to give greater loading
flexibility. To separate the two
parts, slide them horizontally
in opposite directions and
pull them apart. To reassem-
ble, reverse the procedure.
UI07
IEC 436 / DIN 44990
PCE15GB
UI16
Use of the Upper Basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates up to 24 cm in diame-
ter), salad bowls, cups and glasses; these should be
arranged as shown in the pictures.
Glasses with long stems can be placed upside-down
in the raised cup-racks.
US13
US12
US16
US16
Before closing the door, ensure that the spray
arms can rotate freely.
23
The bottom basket is also
equipped with a special
rear plate rack, which can
be removed to allow more
space for saucepans and
salad bowls.
IEC 436 / DIN 44990
Caution
To ensure proper water dis-
tribution to the upper basket,
do not place dishes over the
funnel in the centre of the
basket.