To Fax Using Speed Dialing - Konica Minolta Di1610f User Manual

5

To fax using speed dialing

If speed dial numbers have already been programmed, the fax number of
a recipient can be specified quickly by entering the corresponding speed
dial number.
For details on programming the one-touch dial keys, refer to "7 Using the
Utility Mode [CD]" in the extended manual on the CD-R.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
3
If necessary, change the "Resolution" setting (p. 5-6).
4
Press the [Speed Dial] key, and
then use the 10-Key Pad to enter
the 3-digit speed dial number.
? Has the wrong speed dial
number been entered?
§ Press the [No] key, and then
enter the correct number.
5
Press the [Start] key to begin
scanning and sending the fax.
5-4
Faxing
Di1610f