Required Clearances - Lennox Hearth Products LEGACY C260 Installation And Operation Manual

REqUIRED CLEARANCES

WARNING: BE ABSOLUTELY SURE THE DISTANCE BETWEEN
THE HEATER AND THE SURFACE OF ANY COMBUSTIBLE CON-
STRUCTION IS NOT LESS THAN SHOWN ON THIS PAGE.
Model *A
C260 30"
762mm
E260 23"
584mm
C260 with mantel 17"
432mm
and/or side
u
shields
Model F (1)
C260 22"
559mm
E260 22"
559mm
C260 with mantel 22"
559mm
and/or side
shields u
* Reduced clearances may be available for A, B, C and D dimensions
per NFPA 211 - latest edition, Standard for Chimneys, Fireplaces,
Vents and Solid Fuel-Burning Appliances (in Canada CSA B365 -
latest edition). See section on "Reduction of Appliance Clearance
with Specified Forms of Protection."
** Side view of optional mantel deflector shown.
uElite™ E260 - Not tested for reduction of clearances
(1)Hearth extension reductions: 2" (51 mm) reduction for 2" (51 mm)
raised hearth. (USA) 16" minimum hearth extension on all stoves
and inserts as measured from the door opening of the unit. (Canada)
18"(450 mm) minimum hearth extension on all stoves and inserts
as measured from the door opening of the unit. Minimum distance
of floor protection to the side = 8" (200 mm). This is measured
from the sides of the door opening in the USA and from the sides
of the insert in Canada.
*B *C *D
20" 20" 15"
508mm 508mm 381mm
17" 20" 15"
432mm 508mm 381mm
14-1/2" 20" 8"
368mm 508mm 200mm
G H J
14" 22-1/2" 5-1/4"
356mm 572mm 133mm
14" 22-1/2" 5-3/4"
356mm 572mm 133mm
14" 22-1/2" 5-1/4"
356mm 572mm 133mm
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
E(1)
8"
200mm
8"
200mm
8"
C
200mm
M
E (USA)
50-1/2"
Figure 5
1283mm
45"
1143mm
38"
965mm
M
Figure 6
Notes:
• Facing material that projects more than 3/4" (19mm) from the wall
is considered a mantel or side wall.
C/E260
Depth Min.
Height Min.
Width Min.
Lintel Max. Depth
u
Without use of adjustable offset box or smoke deflector
Table 1 - Fireplace Sizing
Maximum Mantel Depth = 9" (229mm)
COMBUSTIBLE MANTEL
Top Facing / Trim
A
B
D
Insert
Hearth Protection
Mantel
Trim
**
6-1/2"
165mm
F
Hearth Protection
Masonry Fireplace
UBC Chapter 37
14-3/4" (375mm)
22-3/4" (578mm)
u
30-1/2" (775mm)
5-1/4" (133mm)
u
E (Canada)
G
J
8" Ø
Flue Collar
H
7