Silent Messaging (Busy Station) - Toshiba 2000 series User Manual

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

7. Press
 
8. Press
9. Press
To receive a notification message

Press
To cancel the message from the telephone that set the message
Press [PDN] and dial
message.

Silent Messaging (Busy Station)

An audible tone and an LCD message can be sent to an LCD station that is busy. The busy
station can return a message to the calling station's LCD. The two stations may continue this
procedure to carry on a "silent" conversation. Soft Keys must be OFF (
sending and receiving stations for this feature to operate.
To send a message to a busy station
1. When you receive a
busy tone, press
 
2. Enter the message
number.

3. Press
LCD Operation
.
.
. At the destination station, the LCD
displays the originating station
number and the
.
4 <<<
, where XXX is the [PDN] of the telephone that set the
=[DN]
210
+ .
Station message (10~19) and system
message (60~99). The LCD displays
the message. (This assumes the
message is already stored in memory.)
. The destination station beeps four
times and the message displays for 30
seconds, or until you hang up.

LED flashes.
Messages
MSG NO.?
MODE NO.?
SENT 207M
 
+ ) at the
OVER TO ST210
MSG NO?
93